Fujitsu PRIMERGY TX150 S6 Service Supplement Manual page 27

Replacement routines Replacing the IDTEMP combo
Figure 9: Removing the IDTEMP combo
Ê Pull up the locking tab and remove the IDTEMP combo from the holder.
Ê Plug the new IDTEMP combo in the holder.
2
Ê Plug the I C cable on the connector on the IDTEMP combo.
2
Ê Plug the green cable clamp on the connector of the I C cable.
Ê Insert the holder in a slight angle.
Service Supplement 27
TX150 S6