Fujitsu PRIMERGY TX150 S6 Service Supplement Manual page 15

● Protect the CDs/DVDs from exposure to heat and direct sunlight.
I
Laser information
The CD/DVD drive complies with IEC 60825-1 laser class 1.
V
CAUTION!
The CD/DVD drive contains a light-emitting diode (LED), which under
certain circumstances produces a laser beam stronger than laser
class 1. Looking directly at this beam is dangerous.
Never remove parts of the CD/DVD drive casing!
Modules with electrostatic-sensitive components:
Systems and components that might be damaged by electrostatic discharge
(ESD) are marked with the following label:
Figure 1: ESD label
When you handle components fitted with ESDs, you must observe the following
points under all circumstances:
Remove the power plug from the power socket before inserting or removing
●
components containing ESDs.
● You must always discharge yourself of static charges (e.g. by touching a
grounded object) before working.
● The equipment and tools you use must be free of static charges.
Only touch the components at the positions highlighted in green (touch
●
points).
● Do not touch any exposed pins or conductors on a component.
TX150 S6
Service Supplement
Safety notes
15