Setting Power Save Preferences - Quantum Data 700 Series Quick Start Manual

Setting Power Save Preferences

Options Menu
Press the Options button to set system-level options.
Power Save - Sets Power Saver preference
Pwr Save:On
NTSC_CAL___
Clr_Fmts__
NTSC_CAL - Displays calibration menu for setting peak white signal on the TV output
BNC connector
Clr Fmts - Clears all formats from user memory
Setting Power Save Preference
When the Power Save preference is on, and the generator is on battery power, the generator will turn
off after 30 minutes of no front panel activity.
If the generator is running a test sequence in Burn-in mode, the Power Save preference is ignored.
To set the Power Save preference, select Options > Pwr Save.
Calibrate
ReloadFmts
Calibrate - Displays calibration menu
for setting RGB analog video and
sync amplitudes. Appears only if the
generator has been configured to
allow recalibration.
Reload Fmts - Restores factory
default formats
7