AT&T Alcatel-Lucent 9363 Metro Cell Installation Manual page 7

After activation, you should perform the following checks
to ensure that your MetroCell is operating properly:
1. Check that AT&T handsets within range of the MetroCell
display more "bars" of signal strength than they did
before the MetroCell was activated.
2. Make at least one test call and test at least one data
application.
3. Place a test call when within range of the MetroCell and
walk outside the building, at least several hundred feet
away from the MetroCell. Note whether the call remains
connected as you get farther away from the MetroCell.
(This is to test "hand-out" to the public macro network.
Omit this test if there is no coverage from the public
network in the area.)
Please Note: MetroCell customers are provided with
Premium edition at no additional charge. With premium
edition you will be able to operate your MetroCell in
"Closed" mode, which means the MetroCell will be
accessible only to users of those AT&T cellular phone
numbers that you specify.
When checking for signal strength and placing test calls,
please be sure either that the MetroCell is in "Open" mode
or that the phone you are using to check performance is on
the approved user list if the MetroCell is in "Closed" mode.
See the full MetroCell User Guide (available at att.com/
metrocell) for additional information.
AT&T MetroCell Installation Guide • February 2016
7