Gigaswift Ethernet Driver Operating Statistics; Table 3-11 Read-Only Ce Device Capabilities - Sun Microsystems x4422a User Manual

GigaSwift Ethernet Driver Operating
Statistics
These statistics are part of the statistics presented by the netstat -k command.
describes the read-only Media Independent Interface (MII) capabilities.
TABLE 3-11
These parameters define the capabilities of the hardware. The Gigabit Media
Independent Interface (GMII) supports all of the following capabilities.
Read-Only ce Device Capabilities
TABLE 3-11
Parameter
cap_autoneg
cap_1000fdx
cap_1000hdx
cap_100fdx
cap_100hdx
cap_10fdx
cap_10hdx
cap_asm_pause
cap_pause
Description (Local interface Capabilities)
0 = Not capable of autonegotiation
1 = Autonegotiation capable
Local interface full-duplex capability
0 = Not 1000 Mbit/sec full-duplex capable
1 = 1000 Mbit/sec full-duplex capable
Local interface half-duplex capability
0 = Not 1000 Mbit/sec half-duplex capable
1 = 1000 Mbit/sec half-duplex capable
Local interface full-duplex capability
0 = Not 100 Mbit/sec full-duplex capable
1 = 100 Mbit/sec full-duplex capable
Local interface half-duplex capability
0 = Not 100 Mbit/sec half-duplex capable
1 = 100 Mbit/sec half-duplex capable
Local interface full-duplex capability
0 = Not 10 Mbit/sec full-duplex capable
1 = 10 Mbit/sec full-duplex capable
Local interface half-duplex capability
0 = Not 10 Mbit/sec half-duplex capable
1 = 10 Mbit/sec half-duplex capable
Local interface flow control capability
0 = Not asymmetric pause capable
1 = Asymmetric pause (from the local device) capable
Local interface flow control capability
0 = Not Symmetric pause capable
1 = Symmetric pause capable
Chapter 3 Configuring Driver Parameters 47