Others - Hitachi R-ZX740JH Instruction Manual

For household use
Table of Contents

Advertisement

When this happens
You feel electricity a little
when touching the main
body of the refrigerator.
Radio and/or television are
disturbed by noises.
There are thin lines like
scratches on the plastic parts.
There are waving and/or distortions on
the door surface, the side and the top
surface of the refrigerator.
There is a small hole
inside the door.
The electric supply failed.
The refrigerator is not expected
to use for a long term.
Remove frost.
Transporting and moving care.
Glass is broken
door glass,
glass shelf
When a door is shut,
another is naturally
opened.
A door is heavy to open
just after shutting it.
Bothered by vibration
noise, discoloration and
dirt on the back wall due
to moisture.
When a midge fly, etc.
enters in the refrigerator
Check Item
− − − − −
− − − − −
− − − − −
− − − − −
− − − − −
− − − − −
− − − − −
− − − − −
− − − − −
− − − − −
− − − − −
− − − − −
− − − − −
Are there fruit flies around it?
Is there any food with strong flavor in the refrigerator?
Is the door left open for a long time?
Action and Reasons
The refrigerator may be charged with static electricity, but there is no
problem with the safety.
It is caused by the electromagnetic radiation slightly generated from this
refrigerator. Install the refrigerator away from the television, radio and interphone.
It is recommended to connect the power plug to the power outlet separated
from the antenna terminal.
Those lines are caused by the liquid resin flowing when plastic is molded.
They are especially conspicuous for the transparent parts, but there is no
problem with the strength and they can never lead to any cracks.
Slight waving and/or distortions are generated in the manufacturing
process of the refrigerator. They may be conspicuous according to
the position of the light source and/or the brightness etc., which is not
malfunction. There is no problem with the performance.
This hole is used to escape the air inside when filling the heat insulation
material into the door during the production process. It is neither a flaw
nor abnormal thing.
Hole (on a side of Refrigerator Compartment)
Hole (inside of the door)
* Some products have an adhesive seal to conceal the hole. Please do
not peel it off.
Reduce the number of times of opening and closing the door and avoid
storing food additionally until the electric supply is restored.
Please check each setting on the panel for operation after the power
comes back on.
Remove all the items in the refrigerator.
Unplug the refrigerator to take care of the inside or the automatic ice
maker.
Pg.66-69
Leave all the doors open to dry the refrigerator for 2 or 3 days.
Any operation to remove frost is not required because this refrigerator
remove frost automatically. Thawed water is collected in the evaporating
tray and automatically evaporates.
See "Transporting your refrigerator (transport for moving)"
Do not touch a broken glass, but contact your dealer for repair
soon.
Did you shut the door too strongly? Compartments are connected each
other by cool air paths therefore the wind pressure caused by shutting a
door may open another door for just a moment.
Have you leave the door open long time?
It is because that the air taken inside is cooled and its pressure reduces
temporarily.
Don't leave a door open long time. Open and shut it at each time.
Keep it away from the back wall (2 cm or more).
Keep the environment clean.
Put something a fruit fly hates or fruit fly traps or something like that.
Cover food with the lid so that fruit flies can't be attracted by the flavor.
Please close the door as soon as possible.
Pg.78
Pg.46
77

Advertisement

Chapters

Table of Contents
loading

Table of Contents