Tool Socket; Air Filter - Husqvarna WDC220 Workshop Manual

4.3 Tool socket

4.3.1 To disassemble the tool socket on
WDC325L
1. Remove the motor head cover. Refer to
disassemble the motor head cover on WDC325L on
page 9 .
2. Lift the tool socket lid and remove the 2 screws in
the front of the tool socket.
3. Remove the tool socket.
4. Disconnect the wires and replace the tool socket if
the tool socket is damaged.
5. Assemble in opposite sequence.
885 - 001 - 25.09.2018

4.4 Air filter

4.4.1 To disassemble the air filter
1. Remove the motor head. Refer to
on page 9 .
To
2. Rotate and lift the filter tension (A).
3. Remove the filter (B).
Motor head cover
A
B
Repair instructions - 11