Repair Instructions; Motor Head Cover - Husqvarna WDC220 Workshop Manual

4.1 Motor head cover

4.1.1 To disassemble the motor head cover on
WDC220
1. Remove the 2 screws (A) in the handle of the motor
head cover.
2. Loosen the lower edge of the motor head cover.
3. Lift the motor head cover.
4. Disconnect the main switch. Refer to
disassemble the main switch on WDC220 on page
10 .
5. Assemble in opposite sequence.
885 - 001 - 25.09.2018

4 Repair instructions

4.1.2 To disassemble the motor head cover on
WDC325L
1. Remove the handle cover (A) with a screwdriver.
A
2. Remove the 2 screws (B) in the handle of the motor
A
To
3. Remove the handle.
4. Loosen the lower edge of the motor head cover with
5. Remove the motor head cover.
6. Assemble in opposite sequence.
A
head cover.
B
B
a screwdriver.
Note: The adjustable speed control and the tool
socket also become loose.
Repair instructions - 9