Multi Language; Power Save Mode - Toshiba IP4100 Product Bulletin

Quick Reference Guide
Vibrate
1. Go to Menu > Audio settings > Vibrator.
2. Select Vibrate then ring, or Vibrate only, or Vibrate and ring.
3. Exit to idle screen.
4. Receiving a call to the IP4100-DECT will result in vibrating according to the setting.
Alarm
1. Press the Menu key.
2. Navigate down to the bottom row to Alarms, and select.
3. Select Alarm.
4. Enter a time, and Save.
5. Select Recurrent Alarm if desired.
6. Enter a time, save, and select the days of the week.
7. Select Snooze time, and select one of the snooze times.
8. Exit to idle display.
9. An alarm icon will appear at the top of the display when an alarm is enabled.
Date / Time
1. Press the Menu key.
2. Navigate to Settings and select.
3. Select Time & date.
4. Select desired Time and Date formats.
5. Press End until back at idle display.
Note The time and date is provided by the Base and set by the Administrator.

Multi Language

1. Press the Menu key.
2. Navigate to Settings and select.
3. Navigate to Language and select.
4. Navigate to English, Espanol or Francais and press the Select soft key.

Power Save Mode

1. Press the Menu key
2. Navigate to Settings and select.
3. Navigate to Power save and select.
4. Navigate to desired time to initiate turning off the display and press the Select soft key.
Note Possible values for Power Save are in seconds: 5, 10, 20, 30, 45, and 60
16 of 19
Introducing the New IP4100 DECT Telephone!