Charging The Battery - Toshiba IP4100 Product Bulletin

•
Polyphonic ringer support
•
Vibration ring support
•
Additional battery charging station in handset charger
•
High-quality speaker phone
•
Belt clip
The IP4100-BASE (Access Points) Features
•
Attractive design
•
Power over Ethernet support
•
Omni-directional internal antenna for flexible installation options
•
Antenna diversity switching to avoid interference
•
Frequency support 1920-1930mhz with Wi-Fi avoidance technology
•
Colored LED status indication for ease of installation and operation
•
Easy installation via web GUI interface
•
Built-in trouble-shooting tools.

Charging the Battery

1. Install the handset as shown below
2. Use the charger AC adapter to connect the charger's AC jack to a standard 120V AC power outlet.
3. Place the handset in the charger with the display facing forward. The Handset Status should turn on; if
it doesn't, re-seat the handset or try plugging the AC adapter into a different outlet.
4. Place a spare battery if available on the back section of the charger; the battery status LED should turn
on. Pull the battery latch back slightly to fit the battery in the slot.
Introducing the New IP4100 DECT Telephone!
Handset and Charger
5 of 19