Step 6 – Mount Latch Assembly
• Bolt latch to the rear of the mount tube that was installed in Step 5 using 5/16" x 2" carriage
bolt, 5/16" curved washer and a 5/16" nyloc.
• TIGHTEN
Step 7 – Mount Ladder Hook Bracket to Bow
• Bolt ladder hook bracket to the bow in the orientation shown using a 3/8" x 1" carriage bolt, a
3/8" flat washer and a 3/8" nyloc. Be sure the bracket is square to the bow.
• Adjust clamp on bracket to fit firmly against your ladder.
• TIGHTEN
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Instructions – 4A82L
Page 9