RUSTA Bubblemaker Manual page 3

you may removed the base cup of the PET bottle by pulling the base
downwards. Putting on the base cup is done by pressing the cup into
the PET bottle from the bottom. Do not allow materials such as am-
monia, alcohol or benzene based substances to come into contact with
the PET bottle, as these may distort it. PET bottles can be damaged by
extrems of heat or cold (above 50°C or below 0°C) – never wash your
bottle or its cap in the dishwasher, do not leave close to a direct heat
source (oven or radiator).
• Every PET bottle carries an expiry date – DO NOT use a PET bottle once
this date has passed.
• PET bottles are subjected to stringent quality tests and with normal
usage should reach their expiry date with ease. If, however, you notice
that your PET bottle has become worn, scratched, changed its colour,
lost it's transparency or shape or was damaged, do not use it in your
Bubblemaker any longer. Please discard the PET bottle immediately
and replace it with a new one.
OVERVIEW
1. Head
2. Button - to carbonate
3. Housing
4. PET bottle
5. CO gas cylinder (not included)
2
WARNING!
If these instructions are not followed, an accident may
lead to serious personal injury or property damage.
1
3
2
4
5
3