Safety Instructions - RUSTA Bubblemaker Manual

ENG
Thank you for choosing to
purchase a product from Rusta!
Bubblemaker
Read the user manual carefully to make sure that the product is assembled, used and
maintained correctly, as described in the instructions in this user manual. Keep the user
manual for future reference.

SAFETY INSTRUCTIONS

• NOTE! Before exchanging an empty cylinder for a full one, please
make sure to ask for a CO2 gas cylinder that fits your Bubblemaker.
Do not try to fit a cylinder other than recommended CO2 gas cylinder.
WARNING! CO2 gas cylinder:
• There is pressure in the CO2 gas cylinder, children can not play with
the CO2 gas cylinder. If the CO2 gas cylinder loses efficiency, the
valve or the bottle body is damaged, exchange the CO2 gas cylinder.
It is forbidden to repair the Bubblemaker by unauthorized personal
or by yourself. Don't change the valve or the bottle body, it may cause
enormous danger in this way.
• Leave the CO2 gas cylinder in a shady and cool place (temperature
don't be over 50°C). Don't use the CO2 gas cylinder in frozen areas,
don't take out the CO2 gas cylinder while using the Bubblemaker.
WARNING! BubbleMaker:
• Wipe your Bubblemaker with a soft damp cloth. Do not wash it in the
dishwasher. Do not place or store the Bubblemaker close to a heat
source.
WARNING! PET bottles:
• The PET bottles designed for your Bubblemaker have a screw style
fitting. Please ensure that all extra PET bottles purchased have the
same fitting. If using 0,5L PET bottles, after filling with gas, please
make sure that you tilt the PET bottle to release the pressure before
you loosen it.
• IMPORTANT! Do not use any PET bottle which are not approved by
Bubblemaker for use in your Bubblemaker model. For easy cleaning
2
Read through the entire manual
before installation and use!