Important Safety Instructions; General Safety; Electrical Safety - Innovatronix Tronix Explorer XTSE User Manual

Important Safety Instructions ◄◄◄
Save this User's Guide. Contents of this user's guide should be followed during installation, operation and maintenance of Explorer XT SE.

General Safety

Do not expose Explorer XT SE to dust, moisture, liquids, rain or snow.
•
Do not block ventilation openings of Explorer XT SE. Overheating may occur. Do not place Explorer
•
XTSE in a compartment with zero clearance.
Not recommended attachments, when used with Explorer XT SE, may result in risk of fire, electrical
•
hazard or injury.
•
Periodically observe the status of the LED indicators to ensure that Explorer XT SE works as intended.

Electrical Safety

Always connect Explorer XT SE to a grounded outlet. The outlet to which Explorer XT SE is connected
•
must be in close proximity and must be easily accessed.
Flash units and other supported equipment must be properly connected to Tronix Explorer XT SE.
•
Secure working connection and socket from outlet to the inverter.
Before doing any maintenance, switch off and unplug all attachments connected to Explorer XT SE.
•
Explorer XT SE incorporates multiple power sources. Connect only one of these sources at a time.
•
Though not posing any risk, simultaneous connection of any of these sources is not recommended.
Disconnect all power cords to completely remove power from the unit.
If the external flexible cord of the unit is damaged, it shall be replaced by a cord available from the
•
manufacturer.
Explorer XT SE User's Manual | © Innovatronix Inc. | www.innovatronix.com | Revision Date: August 5, 2015
1