Related Manuals for NARVI NC 16
Summary of Contents for NARVI NC 16
-
Page 1: Maintenance Instructions
NARVI SAUNA HEATERS NC 16, NC 20, NC 24 and NC 20 VS. INSTALLATION, USER AND MAINTENANCE INSTRUCTIONS Narvi Oy • Yrittäjäntie 14 • FI-27230 LAPLAND, FINLAND • Phone: 0207 416 740 • www.narvi.fi • narvi@narvi.fi... - Page 2 INSTALLATION, USER AND MAINTENANCE INSTRUCTIONS NARVI SAUNA HEATERS NC 16, NC 20, NC 24 and NC 20 VS. SAFETY INTERVALS Before installing the sauna heater ensure the required safety clearances for structures made of inflammable material are met. The safety clearances of the wood-burning sauna heater are 500 mm to the sides and to the rear and 1200 mm upwards.
- Page 3 4. For brick walls, a ventilation gap of 50 mm between the vertical surfaces of the sauna heater and the wall is sufficient. (Figure 4) The dimension A is determined based on the safety Figure 4 method used for wooden surfaces: - without protection 500 mm - single-light protection 250 mm - double-light protection 125 mm...
- Page 4 Figure 9 AIR FLOW CONTROL PLATES FOR NARVI NC 16, NC 20, NC 24 and NC 20 VS. (There is no air flow control plates for NC 20 VS) Technical data...
- Page 5 Seawater considerably shortens the service life of your sauna heater. FIREWOOD Both hardwood and softwood can be used in the NARVI sauna heater. Fell and cut trees into firewood outside of the growing season. Dry the firewood outdoors in summer and move it to a dry store before autumn rain. Store one or two years’...
Need help?
Do you have a question about the NC 16 and is the answer not in the manual?
Questions and answers