Splice Post - Arrow Storage Products VD102C Owner's Manual & Assembly Manual

Step 5: Posts/Top Frames
You will need for this page:
SS
(QTY: 18)
1
Position Corner Posts at the corner of
the Floor Frame as shown. Fasten the
Corner Post to the Floor Frame using
two (2) Small Screws in each Post.
Support the Corner Posts with
stakes or other devices until Door
Jambs and Splice Post are attached.
2
Attach Door Track Assembly to the
inside of front Corner Post using one
(1) Small Screw in each Post.
3
Attach Rear Wall Angle Assembly to
the inside of rear Corner Post using
two (2) Small Screws in each Post.
4
Attach Side Wall Angles to the inside
of side Corner Post using one (1)
Small Screw in each Post.
Long leg of Rear Wall
Assembly faces down.
Wall Angles must face
inside building.
The Floor Frame must be square
and level or holes will not align.
4
5288 6637
Side Wall
Corner Post
Angle
1
5288
SIDE
5288
4
6637
2
6 18
Assemblies from step 2:
2
• Rear Wall Angle Assembly (1)
Assemblies from step 3:
• Door Track Assembly (1)
REAR
TOP VIEW
FRONT
3
Short Leg on Bottom.
6637
4
Long Leg on Top.
Opening Faces In.
18DS
5288
SIDE
5288