The Purkeys Direct™ liftgate charging system improves the charging of liftgate batteries by utilizing a DC/DC Converter to boost the voltage for optimal charging.
Page 5
LED indicators clearly show the status of the source as well as the status of the liftgate batteries. A quick glance at the Direct Controller assures the driver that the liftgate batteries are ready to go, or alerts the driver that the batteries need maintenance. P: 479.419.4800 | F: 479.419.4801 | www.purkeys.net...
INSTALLATION INSTRUCTIONS Step 1: Remove the plate assembly from the box. Step 2: Place flat washers on each of the four long bolts. Step 3: Mount plate to the backside of battery box by passing the bolts through the pre-drilled holes in the battery box.
Page 7
Step 7: Install the batteries. Positive posts should be toward the door of the battery box. Step 8: Install and tighten the nuts on the battery hold downs. P: 479.419.4800 | F: 479.419.4801 | www.purkeys.net...
Page 8
Step 9: Connect inter-cell connectors (positive to positive and negative to negative). Step 10: Connect the 3/8 eyelet on the 10-gauge wire coming from the 30 amp circuit breaker to the battery positive post on the left side. Install nut and tighten. Step 11: Connect the 10-gauge white wire marked “liftgate battery negative”...
Product or failure of a part not manufactured by Purkeys. This warranty shall not apply if any Purkeys product is used for a purpose for which it is not designed or is in any way altered without the specific prior written consent of Purkeys. ANY...
Need help?
Do you have a question about the Select P1020-K and is the answer not in the manual?
Questions and answers