Cutting; Inspection - ALDI FERREX GDSS72N User Manual

Operation
NOTE!
Risk of injury
Remove the scissor blade guard before each use and replace it after use and during
interruptions.
Switch on device
1. Hold the motor unit
2. Remove the scissor blade guard
Keep all parts away from the cutting blade so that the motor can start safely.
3. Firmly cover the hand grip and at the same time press the switch lock
your thumb.
4. Now press the on/off switch
The device is switched on!
Switch off device
1. Let the on/off switch
The device is switched off!

Cutting

Always operate the blade pointing away from your body, never towards it.
Carefully examine the lawn area before cutting and remove any foreign objects such
as stones, if necessary.
Search hedges and bushes before cutting for concealed objects, such as wire fences,
and remove these if necessary.
Remove thick branches beforehand with pruning shears.
You can achieve the best cutting performance if you use the shrub blade so that the
blade's teeth are directed towards the hedge at an angle of approx. 15°.
With the double-sided, opposing blade, you can cut in both directions with the shrub
blade.

Inspection

WARNING!
Risk of injury from sharp blades
- Use protective gloves.
22
1 by the hand grip in your hand.
5 / 7
12 with your index finger.
12 go.
.
9 with