Cleaning The Device And Accessories; Operation; Battery - ALDI FERREX GDSS72N User Manual

3. Inspect the device and individual parts for damage. Do not operate a damaged
device; instead contact the manufacturer via the service centre listed on the
warranty card.

Cleaning the device and accessories

1. Remove the packaging and all protective film.
2. Clean the device and accessories before using them for the first time (see
"Cleaning").

Operation

Battery

Inserting the battery
1. Slide the battery
grip in the motor unit
clicks audibly.
2. Make sure that the battery
firmly seated.
The battery has been inserted.
Removing the battery
1. Press and hold the battery pack release button
2. Pull the battery
The battery has been removed.
Check the charge level
1. Briefly switch on the device (see "Switch on device").
The battery indicator is activated.
The following charge levels are displayed:
- 3 LEDs illuminated (green-yellow-red): battery fully charged.
- 2 LEDs illuminated (yellow-red): battery charge decreased.
- 1 LED illuminated (red): battery is empty.
Stop working and charge the battery.
2 into the hand
1 until it
2 is
2 out of the hand grip in the motor unit
1
1
10 .
Before first use
2 10
1 .
19