Removing/inserting the blade
Removing the blade
1.
Put on the scissor blade guard
7
.
2. Remove the battery
"Removing the battery").
3. Press both release buttons
the same time and carefully remove
the blade from the motor unit
holding the blade cover
The blade has been removed.
Inserting the blade
1.
Insert the blade so that the peg
slides into the guide of motor unit
1
.
2. Push the blade onto motor unit
until the lock clicks audibly into
place.
The blade has been inserted.
Switching on/switching off the device
WARNING!
Risk of injury
Firmly hold the device until the blade stops.
3
5
/
2
(see
14
at
1
15
.
4
5
1
14
1
1
Operation
14
15
15
21