Advertisement
Troubleshooting
NO
PROBLEM
1
"NO
DISC"
displayed
on
screen
2
No sound
3
Remote control is
not working
4
No sound from mic
5
Screen display on TV
is in black and white
SOLUTION
is
1. Ensure the disc is placed inside the tray correctly with the
the
label side up.
2. Ensure the format of disc is compatible.
3. Ensure the discs are not dirty or damaged.
4. Clean the lens of the DVD player with a lens cleaning discs.
1. Ensure speakers are connected properly.
2. If connecting to a TV, ensure correct connection to the TV.
3. Ensure the unit is not on mute.
4. Increase volume.
5. Increase volume on your Bluetooth or Aux-in device.
1. The remote was not aimed at the unit correctly. Aim the
remote at the display screen on the unit.
2. Batteries are not inserted correctly. Ensure batteries are
inserted as per the polarity marked in the battery
compartment of the remote control.
3. The batteries are flat. Add new batteries to the remote
control.
When the unit is connected to a TV screen, press the SETUP
button on the remote control to access the SETUP page.
Access the AUDIO settings.
Access the KARAOKE settings.
There you can access the MIC SETUP.
Turn the mic on or off. Adjust the mic volume. Adjust the
echo level.
When the unit is connected to a TV screen, press the SETUP
button on the remote control to access the SETUP page.
Access the PREFERENCE page.
Access TV type.
Arrow across to amend the settings.
PAL is for Australia. Press the ENTER button on the remote
control to save your selection.
Advertisement
