Philips Ladyshave Manual page 10

ENGLISH
10
1 Remove the shaving head (B) from the appliance (fig. 11) to clean
the hair chamber and the shaving head.
2 Rinse the hairs off the shaving head (fig. 12) and the appliance
(fig. 13).
3 Put the shaving head back onto the appliance ('click').
From time to time
Once a year in case of normal use.
1 Remove the shaving head (B) from the appliance (fig. 11).
2 Release the shaving foil unit from the trimmer unit (1) and
separate the two units (2) (fig. 14).
3 Brush the shaving foil and the cutter block carefully (fig. 15).
4 Place the shaving foil unit on a solid and flat surface and press the
trimmer unit back onto the shaving foil unit (fig. 16).
5 Put the shaving head back onto the appliance ('click').
Maintenance and replacement
1 Lubricate the shaving foil with a drop of sewing machine oil twice
a year (fig. 17).
If you use the Ladyshave twice a week or more, we advise you to
replace the shaving foil and cutter block every one to two years.
The shaving foil may only be replaced with an original Philips
shaving foil (type HP2904).
The cutter block may only be replaced with an original Philips
cutter block (type HP2907).