Honeywell Tuxedo Touch User Manual page 56

Automation
General
Local Web Server URL Access
In cases where the Tuxedo is set for DHCP, there is the possibility the IP address can change upon a router reset. This
can block the users attempt to access the Web Server locally. To correct this problem, navigate to the Address Box of the
browser and type in HTTP://Tux.MyLanConnect.com. The browser will display the following information:
Description
TUXW_XX.XX.XX
TUXW_XX.XX.XX
TUXW_XX.XX.XX
Troubleshooting
If the page does not populate, from the Home Screen press Setup >System Information.
1.
Press "Sync IP to Server"
2.
The message "System IP sync to server is successful," when a successful connection is made.
3.
If no connection is present, the Message "Keypad is not in the network. Please check the network connectivity."
4.
If the keypad is connected to the LAN with no internet access, the message "System IP sync to server has
failed." appears.
If Authentication for Web Server Local Access is enabled, and no user name and password is created, the browser will
produce the following message: "
setup to create an account for remote access."
NOTES:
• To correct this add a username/password and verify the user is enabled.
• Browser may block access if the Secured Web Server Access (https) option is enabled. During remote login, if the
browser displays a Security/Certificate Error (see examples below) this is not a threat and it is recommended that
you continue.
Remote Access (cont'd)
Z-Wave device management
Emergency icon
Rooms
Remote scenes
Weather
Training videos
MAC Address
00D02DXXXXX
00D02DXXXXX
00D02DXXXXX
Warning Remote access has been deactivated. Go to your Tuxedo's login
Setup Account setup
Disp. & Audio setup
IP setup
System setup
Email setup
Voice setup
Remote firmware upgrade
Device Name
Master Bedroom Keypad
Garage Entry Keypad
Front Door Foyer Keypad
52
Internal IP
192.168.1.120
192.168.1.110
192.168.1.112