Honeywell Tuxedo Touch User Manual page 34

Using Z-Wave Devices and Scenes (cont'd)
Detailed Scene Configuration
Scenes must have at least 1 trigger, 1 action (up to 5) and the event to trigger. The Condition section is optional.
Time
Set the TIME: In the Trigger/Condition box, press Add > TIME > Set the occurrence.
If ONCE > Enter Date; if REPEATED > choose days of the week; if BY CLOCK > press on the "Hour/Minutes" displayed
and enter the Start and End Time > press on AM/PM; if SUNRISE or SUNSET > Press BY CLOCK until the desired
setting is displayed. Check the Critical Event check box to record and store a maximum of two events even when the SD
card is not available. If more than 2 critical events occur, then the older one is replaced by the latest event.
NOTES:
• The Sunrise/Sunset feature is dependent on the "Region" selected in the "Weather Forecast" section and requires
internet access for accuracy.
• BY CLOCK allows you to activate the scene for a specified period of time.
Security
Set the Security Mode: In the Trigger/Condition/Action box, press Add > SECURITY > Select from DISARM, AWAY,
STAY, NIGHT, AWAY SECURED or ALARM > Enter User Code, if required.
NOTES:
• AWAY triggers upon arming away.
• AWAY SECURED triggers when exit delay has expired.
Thermostat
Set the Thermostat: In the Trigger/Condition/Action box, press Add > THERMOSTAT > select a Thermostat device
from the drop-down menu or press Select Thermostat Group to activate more than one device. See the Group Setup
section. Use ABOVE and BELOW to increase/decrease the temperature or press the Temperature Value box and enter
2 digits for the desired temperature.
NOTES:
• Test thermostats first to ensure proper function in the "Scene."
• Some thermostats do not update temperature status automatically (i.e., Wayne Dalton).
Light
Set Lights (on/off): In the Action box, press Add > LIGHT > select a Light Device from the drop-down menu or press
Select Lights Group to activate more than one device; set the action to ON, OFF, Dim level for multi-level switches; or
select ON FOR TIME and press on the "Hour/Minutes" displayed and enter an amount time.
NOTE: ON FOR TIME allows you to activate the scene for a specified period of time.
30