Room Setup; Secondary Tuxedo Controller - Honeywell Tuxedo Touch User Manual

Using Z-Wave Devices and Scenes (cont'd)

Room Setup

A room is a defined collection of different types of Z-Wave devices, which can be used to organize a large number of Z-
Wave devices into smaller, more manageable device lists. Up to 50 rooms can be created with no limitation to the
number of devices in each room.
Room Name
Device 1
Device 2
Device 3
Device 4
Follow the procedure below to create a Room.
1. Press Room Setup
2. Enter a room name > press GO.
3. Check the box next to the device(s) that you want
to be controlled in this Room and press Save
4. Select Edit to make changes to existing
Rooms; use Delete to delete a Room.
5. If settings were changed, a pop-up confirmation
window displays "Settings Saved."

Secondary Tuxedo Controller

After all Z-Wave devices have been added into the
Primary Tuxedo (#1), the device information can be downloaded to a Secondary Tuxedo (#2). Up to 231 secondary's plus
1 primary controller, for a total of 232. Keep Tuxedos within 40 feet of each other (if it does not work, move the keypad
closer to the primary), apply power to Tuxedo #2 and do the following:
1. At Tuxedo #1 (Primary Controller): Press Automation
screen is displayed.
NOTE: If used for Remote Services, Tuxedo should not be configured as a secondary controller. See the Remote
Services section later in this document.
2. At Tuxedo #2 (Secondary Controller): Press Z-Wave Primary
icon changes to an
NOTE: The message "Please remove all Z-wave devices from network first" appears if Z-Wave devices are
enrolled. If no Z-Wave devices exist, a confirmation will display "Change to Secondary Controller? Note: Total
Connect feature will be unavailable in secondary controller mode." Select Yes to change this keypad to a
Secondary Controller.
3. At Tuxedo #1, Press Add Device
4. At Tuxedo #2: Press Add Device
device information from the Primary Tuxedo is downloaded to the Secondary Tuxedo:
Example 2: Assigning Devices
Kitchen
Kitchen Over Head
Light
Kitchen Cabinet Lights
Kitchen Fan
Kitchen
> Add .
.
icon, representing the controller is now in secondary mode.
.
. "Secondary Controller Inclusion Devices Upload in process." When
Bedroom Living Room
Bed. Lamp L.R. Lamp
Bed. Fan L.R. Fan
Bed Overhead Light L.R. Outlet
Example 2: Screen Interface
> Z-Wave Setup ; the "Z-Wave Device Management"
(located in the lower right side of the screen). The
32