Routine Care; Time/Date Setup - Honeywell Tuxedo Touch User Manual

Routine Care

•
Treat the components of your security system as you would any other electrical equipment. Do not slam sensor-
protected doors or windows.
•
Keep dust from accumulating on the keypad and all protective sensors, particularly on motion sensors and
smoke detectors.
•
The keypad case and sensors should be carefully dusted with a dry soft cloth. Do not spray water or any
other fluid on the units.
Web Server/Hosting is not Listed for use in agency compliance installations.
Remote Arming/Disarming/Programming is not to be used in agency compliance installations.

Time/Date Setup

When the time is set, it is stored in the keypad and sent to the control panel after pressing Apply and answer Yes to the
next prompt. Additionally, when using the keypad, the panel may download its time into the keypad periodically after the
clock is set (for Vista residential and newer commercial panels such as Vista 128BPT).
If Get Time is pressed, the keypad uploads the time and date from the control panel and exits the Set Time & Date
screen.
Note: This icon appears with residential panels and may not appear with all commercial panels.
Setting Daylight Saving Time
1. From the "Home" screen, press Setup
2. Press Time/Date Setup
3. Press DST if you want daylight saving time to affect your system clock.
4. Set the Start DST time and then the End DST time by pressing the Month, Weekend and Hour that you want DST to
start. Press APPLY
Note: If DST On (Daylight Saving Time) is selected, the keypad adjusts for Daylight Saving time at the month, week and
time chosen. Make sure DST On is checked to enable this feature.
Setting current Time and Date
1. Press Time/Date Setup
month.
2. Press the Day of the month by choosing the day on the calendar view.
3. Press the displayed Year / Hour / Minutes and enter the current year/hour/minute(s). Select AM or PM. (Each
depression switches the AM/PM display).
4. Press the MMDDYY "drop down," and select a format for which you want the year to be displayed. When done, press
Apply .
Note: After each selection the window closes automatically and the selection is displayed.
Select if you want a 12-hour or 24-hour format for your time display by pressing the check box to the left of the 12 Hour
display.
When done, a confirmation screen displays: "Time Setting Confirmation Set time on the security system as well?
Yes or No"
Yes saves the time changes in your security system. No saves the changes to the keypad only.
Note: A Yes response is recommended.
Setup Menus (cont'd)
> System Setup
> enter your Authorized Code.
to save the settings.
and enter your Authorized Code. Press the Month "drop down," and select the current
.
46