Scan Revert - Kenwood NX-1000 Series User Manual

SCAN REVERT

The Scan Revert channel is the channel selected when you press the PTT switch
to transmit during scan. Your dealer can program one of the following Scan Revert
channels:
Selected: The last channel selected is assigned as the new revert channel.
•
Selected + Talkback: If the channel has been changed, the newly selected
•
channel is assigned as the new revert channel. The transceiver "talks back" on
the current channel.
Priority 1/ Priority 2: If your dealer has programmed a Priority channel (either
•
Priority 1 or Priority 2), this channel is the revert zone-channel.
Priority 1 + Talkback/ Priority 2 + Talkback: If your dealer has programmed
•
a Priority channel (either Priority 1 or Priority 2), this channel is the revert
zone-channel. The transceiver "talks back" on the current receive channel.
Last Called + Selected: The last channel on which you received a call is
•
assigned as the new revert channel. The transceiver "talks back" on the
current channel. If the channel has been changed, the newly selected channel
is assigned as the new revert channel.
66