Kenwood NX-1000 Series User Manual page 30

Direct Channel 1 ~ 5 Select
Allows you to set the currently selected channel as the Direct Channel 1 ~ 5.
1
Select the channel to be set as Direct Channel.
2 PF Button:
Press and hold the programmed button to set the currently
selected channel as Direct Channel 1 ~ 5.
• Beep C (3 beeps) sounds.
Menu Mode:
the currently selected channel as Direct Channel 1 ~ 5.
Display Format
Allows you to switch the display between the zone-channel number and the
channel name.
PF Button:
Press the programmed button to switch the display between the zone-channel
number and the channel name.
Menu Mode:
Select "DISP FMT" and press the [ S ] button to change the Display Format
setting.
[Analog/ NXDN/ DMR]
Select "DR 1 SEL" ~ "DR 5 SEL" and press the [ S ] button to set
[Analog/ NXDN/ DMR]
Zone-channel number
Channel name
30