How To Pair Wireless Bt Receiver; Troubleshooting - Pyle PFA540BT User Manual

HOW TO PAIR WIRELESS BT RECEIVER

The system has built in bluetooth receiver.
If you are pairing the Wireless BT from a mobile phone for the first time, Open the
system and press the
search for the Wireless BT sender ( Device ID: PyleUSA) by your own Wireless BT
sender (mobile phone).
If the system have been paired already with the bluetooth sender, the next time
you pair
will be automatic.
After that you can enjoy music by the Wireless BT receiver. The system will turn to
normal working state if theres no pairing in 10 minutes.

TROUBLESHOOTING

PROBLEM
The system has no power
No sound at all
Either of the main channels
has no sound
Abnormal LED screen display
This product can expose you to a chemical or group of checmicals, which
may include "Nickel Carbonate" which is known in the state of California to
cause cancer, birth defects, or other reproductive harm. For more info, go to
https://www.p65warnings.ca.gov/.
key on the remote and the LED will show "pair". Then
POSSIBLE REASONS/SOLUTIONS
~ The AC adapter is connected incorrectly.
~ The socket has no power
~ Incorrect selection of input signal.
~ If mute state is turned on.
~ Sound source machine is not powered.
~ The signal plug is connected incorrectly or
lines had short-circuit.
~ It may be affected by exterior strong disturbance,
turn off first and turn on again
~ Avoid direct sunlight/heat.
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
www.PyleUSA.com
3