Louvolite Vertical Blind Instruction

Battery Specification: Li-ion Battery, 3.7V.
Please charge the battery when the
Technical
motor alarm beeps or motor fails
Data
to turn the blind.

Operation

Step
PLEASE SKIP STEP ONE AND GO TO THE STEP TWO IF THE MANUFACTURER HAS PROGRAMMED A
REMOTE WITH A MOTOR BEFORE DELIVERY.
Press and hold down
Pairing
the SETTING button on
1
remote
the motor.
control
with motor
Press the CONFIRM
2 button on the back of
the remote control
Changing
Press
motor
the
1
rotation
same time to change
direction
the motor direction
THE WHOLE LIMIT SETTING MUST BE FINISHED AT ONE TIME
Press and hold LIMIT
1 button on the back of
the remote
Motor turns in a
Set up tilt
clockwise direction and
range
2
stops when you reach
the end
Motor turns in a
anticlockwise
3
direction and stops
when it reaches the end
Operation
Release this button when
the LED flashes red.
When the LED flashes green
the remote will now been
paired with the motor
button and Release both buttons when
button at the the Green LED flashes.
The direction will now be
reversed
Release the button when
the Red LED flashes on the
motor
Red LED flashes
Red LED flashes.
Now the limit settings have
been done for both ways
RF SWITCH
SETTING BUTTON
Charging PORT
Result
Vertical Blind
Motor Instruction
LED
PRESS AND HOLD 90
TO OPEN BLINDS
Remote Control
Illustration
O
Issue: 1/15