Advertisement
Quick Links
PARAMETERS
Model No.
Input Voltage
Rated Torque
Rated RPM
Rated Current
Stall Current
IP Class
Control Mode
Working Temperature
Receiving Frequency
Modulation
Receiving Distance
L I T H I U M C E L L U L A R & P L E AT E D M O T O R
Fitting & Operating Instructions
AM24B-06/34-ES-I-EB
7.4V
0.6Nm
34 RPM
1.2A
2.5A
IP44
RF remote control /APP
-10 ~ +60C°
433.92MHz/2.4G
ASK/ Bluetooth
≥ 80m
KEY FEATURES
ƒ Low power consumption design, compatible with
7.4V battery box and solar panel.
ƒ Dot move and continuous move for option, free to
change the motor run direction.
ƒ Can set multiple limit positions(UP/DOWN/Middle
limit positions).
ƒ Position sensor open circuit and short circuit
protection function, stop on block function.
ƒ Can detect the circles of motor rotation, high
precision.
ƒ Automatic correction function for the displacement
caused by braking.
ƒ Power failure can save position and function
parameters.
MOTOR OVERVIEW
Advertisement
Related Manuals for Louvolite AM24B-06/34-ES-I-EB
Summary of Contents for Louvolite AM24B-06/34-ES-I-EB
- Page 1 ƒ Can detect the circles of motor rotation, high precision. ƒ Automatic correction function for the displacement caused by braking. ƒ Power failure can save position and function parameters. PARAMETERS MOTOR OVERVIEW Model No. AM24B-06/34-ES-I-EB Input Voltage 7.4V Rated Torque 0.6Nm Rated RPM 34 RPM Rated Current 1.2A Stall Current 2.5A...
- Page 2 REMOTE LAYOUT BACK OF REMOTE LED CHANNEL LED CHANNEL LED CHANNEL INDICATOR INDICATOR INDICATOR STOP STOP STOP DOWN DOWN DOWN CHANNEL CHANNEL ON/OFF SET BUTTON BUTTON BUTTON BATTERY R1940 - 1CH R1942 - 6CH - WH R1944 - 16CH Push button Push button Push button Also available in black...
- Page 3 FINE TUNING LIMIT POSITION Send blind to position you wish to adjust. Press and hold SET button until motor oscillates. Press UP/DOWN buttons to adjust the blind to the exact limit position. Press SET button again until the motor oscillates, fine tuning limit position is set. JOG MODE Press and hold STOP button on the remote until the motor oscillates.
- Page 4 The first limit cannot be deleted separately, to remove this limit all limits must be deleted. DELETING LIMIT POSITIONS Let the motor run to the limit position which needs to be deleted. Press and hold SET button until the motor oscillates once, continue to hold until the motor oscillates once more.