Korg Pa4X Updating Instructions page 4

9. When the loading procedure is finished, the "System
Update Completed" message appears, inviting you to re-
start the instrument.
10. Turn the instrument off by keeping the
ton pressed for about one second, then turn it on again by
shortly pressing the POWER
Loading the Musical Resources
(Factory Restore)
Loading the Operating System may also update the Musi-
cal Resources (Sounds, Styles...). This type of data is not
actually updated until you execute a Factory Restore. The
need for a Factory Restore is indicated in the documents
accompanying the Operating System.
Warning: Executing a Factory Restore will delete all User
data and all custom Factory data (if any). See the "Making a
safety copy of your data" section above for instructions on
how to make a safety copy of your data.
POWER
button.
1. Press the MEDIA
access the Utility
2. Select the Factory Restore
ecute button.
but-
3. The Restore
selected if you want to reset everything. If you prefer to
preserve some type of data, deselect the
deselect the type of data
4. Touch OK to confirm. A message appears, asking you if
you want to erase all the data in the internal memory. Touch
Yes to confirm (or
reloaded and updated, and all User data will be erased.
5. If you have saved your User and/or custom Factory
data, reload them by using the
See the chapter dedicated to the file management in the
User's Manual for more information.
2
button, then touch the
page.
option, then touch the
dialog appears. Leave the
All
to be preserved.
No to cancel). All the Factory data will be
Media > Load
Utility tab to
Ex-
All checkbox
checkbox, then
operations.