Loading The Operating System - Korg Pa4X Updating Instructions

Pa4X – Operating System Update
Introduction
KORG may release updates to the instrument's Operating
System. Updates can include new features, improvements,
bug fixes, new sounds and/or styles. The most up-to-date
version can be downloaded from our web site
com).
Note: By loading the new Operating System, you also load
all the features added by the previous updates.
Note: Please do not turn the instrument off before the
loading operation has been completed!
Making a safety copy of your data
Loading this file will not modify your User data, but we sug-
gest you create a safety copy of your data before proceed-
ing.
• To save all User data, use the
• In case there are custom Factory data in the internal
memory, go to the Global > Mode Preferences > Media
and remove the protection to the Factory data you want to
save; then use the Media > Save
items or banks.
• In case there are custom Factory Sounds in the internal
memory, backup all your data by using the
Backup command in the Media > Utility
See the chapter dedicated to file management in the User's
Manual for more information.

Loading the Operating System

Here is how to load the Operating System of your instru-
ment.
1. If it is on, keep the POWER button pressed for about
one second to turn the instrument off. Then keep the
TRO 1 button pressed, and press the POWER button to turn
the instrument on again.
2. Keep the INTRO 1 button pressed, until the
Calibration page appears: this will confirm that the system
loading procedure has been started. Execute the display
calibration by touching the red cross wherever it appears.
(www.korg.
Media > Save All procedure.
page
procedures to save single
Full Resource
page.
IN-
Touch Panel
3. A message will appear, asking you to select either a
.pkg or an .upd Operating System file. Download the file
from our web site.
4. Unzip the Operating System file from the .zip archive,
and copy the resulting .pkg/.upd file to an USB storage de-
vice.
5. Connect the USB storage device where you copied the
system file to the USB HOST
ton in the display to close the dialog box.
6. When a file selector appears, use the
menu (in the lower left side of the display) to choose the
device connected to the
Operating System .pkg/.upd file to select it, and touch the
Select button on the display to confirm loading.
Device pop-up menu
7. A dialog will appear, asking you to choose whether to
update or to cancel the operation. Touch the
to confirm updating the Operating System.
8. A progress bar appears, showing the loading status.
1
port, then touch the
Device
USB HOST port. Then touch the
File selector
Update
OK but-
pop-up
button