Kenwood KAH740PL Instructions Manual page 5

to use your blender
attachment ( Dè E)
1 Remove the high speed outlet
cover.
2 Place the blender over the
high speed outlet with the
line up graphic
holder facing forward. Turn
clockwise and at the same
time push down until the unit
engages. Then turn further
clockwise until the attachment
locks into position.
Speed Max operating time
Max
Allow the ingredients to blend
l
until smooth.
after blending (F)
1 When the desired consistency
is reached, turn the speed
control to the 'O' off position.
2 Hold the blade holder and
turn anti-clockwise to release
the blender. Then remove the
blender supporting it with
both hands.
3 Turn the bottle the other way
up and unscrew the blade
assembly.
using the drinking
lid (G)
1 Fit and lock the lid by turning
clockwise.
2 When you want to drink,
simply flip open the lid cover.
The drink can be consumed
straight from the bottle.
▼
on the blade
60 secs
hints & tips
Note that when the
l
bottle is filled to max
capacity (600ml), this is
approximately two servings.
If you do not intend
l
to consume your drink
immediately, keep it
refrigerated.
Ensure your drink is thin
l
enough to be able to drink
from the dispensing lid. To
make a thinner drink add
more liquid.
Once your drink has
l
reached the desired
consistency, you can use
the pulse 'P' to ensure all
ingredients are thoroughly
blended. Use the pulse 'P'
to operate in a start stop
action to control the texture
of your drink.
After blending, some drinks
l
may not be completely
smooth due to seeds
or the fibrous nature of
ingredients.
Some drinks may separate
l
on standing, therefore it is
best to drink them straight
away. Separated drinks
should be stirred before
drinking.
When the dispensing lid
l
is fitted always keep the
bottle upright.
5