Philips VR969/05 Operating Manual page 34

Method 2 "Insert CC":
&
Use the ® button to select the OSD
page "Recorder" (for video recorder mode).
Search on the cassette in the video recorder the
tape position where the recording is to begin.
Switch the video recorder to still picture (playback-
pause).
Depending on the camcorder type connected, it is
possible to mark the beginning and the end of the
recording.
Follow the user guide on the OSD page.
/
Use the ; button to select the OSD page
"Player" (for camcorder mode).
Search on the cassette in the camcorder the tape
position where the insert recording is to begin.
Use the slider controls {} to
adjust the recording level so that the "0 dB" mark
lights up during the loudest passages of the
recording.
If possible, mark the begining of the insert recor-
ding with the ( button, or
switch the camcorder to still picture (playback-
pause).
(
If necessary, search on the camcorder the desired
end of the insert recording and mark it with the
) button.
Follow the user guide on the OSD page.
How to start the insert recording depends on the cam-
corder used and the corresponding synchro-edit cable.
Variant 1. The video recorder controls
the camcorder
)
Start copying with the g button on the
video recorder.
The camcorder starts with "PLAYBACK" and at
the same time the video recorder starts with
"RECORDING".
<:
The insert recording is automatically stopped. If you
wish to stop earlier, press the r button on
the video recorder.
<>
Terminate insert-edit recording with the l
button or the d button on the remote
control.
34
Variant 2. The camcorder controls the
video recorder (only possible with
"Insert CC").
)
Start copying with the corresponding button on the
camcorder or its remote control.
The camcorder starts with "PLAYBACK" and at
the same time the video recorder starts with
"RECORDING".
<:
The insert recording is automatically stopped. If
you wish to stop earlier, press the PAUSE or STILL
button on the camcorder or its remote control.
<>
Terminate insert-edit recording with the l
button or the d button on the remote
control.
Note:
* If your camcorder is equipped with a 2.5 mm ø
control socket (LANC control), the playback and fast
wind functions of many camcorders can be control-
led with the corresponding control elements on the
video recorder.