Assigning Tv Channels Manually - Philips VR969/05 Operating Manual

Assigning TV channels manually

The following setting is not necessary if the TV chan-
nels have been set using the "Easy Link" function.
You can allocate any TV channel found to the program-
me number of your choice so that you have, for exam-
ple, the same TV channel sequence as on your TV set.
!
Switch on the TV set and select the programme
number for the video recorder.
"
Call up the "INSTALLATION MENU" by pressing
button S. The line "TV channel list"
becomes active.
¤
Confirm the line by pressing the button
The "TV CHANNEL LIST" appears.
The last programme number selected, e.g. "01",
becomes active.
$
Select the TV channel that you wish to move
by pressing the button f or e.
Press the button _.
TV CHANNEL LIST
PR CH
01 C28
02 C25
03 C42
04 C44
05 C46
06 C48
07 S18
>
Select -
%
Using the button f or e, move the TV channel
to the desired programme number.
TV CHANNEL LIST
PR CH
01 C28
02 C25
03 C42
04 C44
05 C46
06 C48
07 S18
Insert - SELECT
>
Change -
12
_.
NAME DEC
BBC1 o f f
BBC2 o f f
ITV o f f
CH4 off
CH5 off
MTV o n
SKY o n
Exit - MENU
NAME DEC
BBC1 o f f
BBC2 o f f
ITV o f f
CH4 off
CH5 off
MTV o n
SKY o n
^ v
Move -
Confirm - OK
&
Confirm by pressing the button B. The TV
channel line is inserted and the other channel lines
are moved on a line. If you wish to cancel an
undesired TV channel, press the button m
instead of button B.
/
Sort all of the TV channel lines (steps
the desired order.
(
Complete the setting by pressing the button
l twice.
If you wish to change the basic setting, read the
detailed notes in the section "Manual search".
Note:
* You can insert "new" TV channels into the "TV
CHANNEL LIST" at a later date. To do this, press
the p button in step
lines will appear to the right of the channel number.
The "new" channel line is inserted and the following
lines are shifted one position down.
Press the _ button.
The OSD page, e.g. "CHANGE TV CHANNEL P06",
appears on the screen. Enter the data for the new
TV channel. Confirm the entry by pressing the B
button. Complete the setting by pressing the
l button twice.
$ &
- ) into
&
. Several horizontal