Advertisement
6. Insert three soldered wires to Shrinking Tubes
7. Insert Bearing Tube to Wound Stator
Komodo Hobby
www.komodohobby.com
First, drop some Locitite to bearing tube.
(No. 272 Red Loctite is one of the best choice to
glue bearing tube)
Now, you have three soldered
wires attached to coils. Insert
those soldered wires into
shrinking tubes for insulating.
Second, insert bearing tube to stator
until you get 0.9mm shoulder. Then,
wait for the Loctite dry.
8
Advertisement
