komodo KH-278 Building Instruction Manual page 6

Step 5
Step 6
Step 7
Step 8
Komodo Hobby
www.komodohobby.com
1: Put the magnet wire "S2" to tooth No.5
2: At tooth No. 5, wind 7times from the hub to the
outer edge of hammerhead. Then wind 6times
back to the hub.
1: Put the magnet wire "S3" to tooth No.6
2: At tooth No. 6, wind 7times from the hub to the
outer edge of hammerhead. Then wind 6times
back to the hub.
1: Put the magnet wire "S1" to tooth No.7
2: At tooth No. 7, wind 7times from the hub to the
outer edge of hammerhead. Then wind 6times
back to the hub.
1: Put the magnet wire "S2" to tooth No.8
2: At tooth No. 8, wind 7times from the hub to the
outer edge of hammerhead. Then wind 6times
back to the hub.
5