Advertisement
Available languages
Available languages
6881096C90.book Page 10 Tuesday, July 22, 2014 10:00 AM
To change to the slimline battery position:
1.
Remove the battery locating rail by pinching inward both
sides while pulling from the charger pocket.
2.
Turn the battery locating rail around so the back faces
the front.
3.
Re-insert into the charger pocket.
Table 3 LED Indications of Battery/Charger Status
LED Status/Color
No LED indication
Single flash GREEN
Blinking RED
Steady RED
Blinking YELLOW
Blinking GREEN
Steady GREEN
Battery/Charger Status
Battery is inserted incorrectly.
Successful charger power-up.
Battery is unchargeable or not making proper
contact.
Battery is in rapid-charge mode.
Battery is waiting to be charged. The battery is
either too hot, too cold, or over discharged. The
battery does not have to be removed. (The char-
ger will initiate charging when battery has recov-
ered.)
Battery is charged to 90% or greater capacity.
Battery is fully charged.
10
Advertisement
