Test Facility - Allied Telesis AT-AR020 PRI E1/T1 Hardware Reference Manual

42 Port Interface Card
Using the Test Facility to verify operation
The built-in Test Facility software provides the best method to properly verify
the correct operation of all PICs except the AT-AR026 PIC. For more
information about using the Test Facility, see "Test Facility" on page 43.
Using an existing network to verify operation
To test a PIC using an existing network, the PIC interfaces must be configured
correctly to route packets. For more information about configuring interfaces,
®
see the relevant chapter in the AlliedWare Operating System Software Reference
for your switch or router.
C613-03023-00 REV N