Subscribe to Our Youtube Channel
Related Manuals for Allied Telesis AT-A15/SX
Summary of Contents for Allied Telesis AT-A15/SX
-
Page 1: Quick Install Guide
AT-A15/SX AT-A15/LX AT-A16 AT-A17 AT-A18 AT-A19 Expansion Modules Quick Install Guide PN 613-10814-00 Rev B... - Page 2 Copyright 1999 Allied Telesyn International, Corp. 960 Stewart Drive Suite B, Sunnyvale CA 94086, USA All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesyn International, Corp. Ethernet is a registered trademark of Xerox Corporation. All other product names, company names, logos or other designations mentioned herein are trademarks or registered trademarks of their respective owners.
-
Page 3: Safety Warnings
Safety Warnings Standards: This product meets the following standards U.S. Federal Communications Commission RADIATED ENERGY Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. -
Page 5: Table Of Contents
Overview ..........................1 Verifying the Package Contents .....................3 Reviewing Safety Precautions ....................4 Installing the Expansion Module ..................5 Changing the GBIC Module in the AT-A15/SX or AT-A15/LX Expansion Module ..8 Appendix A Translated Safety Information ....................11 Appendix B AT-A1x Series Expansion Module Quick Install Guide Feedback ........19 Appendix C Technical Support Fax Order .....................21... -
Page 7: Overview
Overview The AT-A1x Series Expansion Modules are optional uplinks for the AT-8216FXL/ MT, AT-8216FXL/VF, AT-8216FXL/SC, and AT-8224XL Fast Ethernet Switches. The expansion modules are designed to be installed into the two expansion slots on the front of each switch. The expansion modules, which can be installed in any combination, offer you flexbility in building or expanding your network. - Page 8 Overview Figure 3 AT-A17 Expansion Module Figure 4 AT-A18 Expansion Module Figure 5 AT-A19 Expansion Module...
-
Page 9: Verifying The Package Contents
AT-A1x Series Expansion Modules Quick Install Guide Table 1 Expansion Module Features Connector Module Port Type Cable Type Maximum Cable Length Type AT-A15/SX 1000Base-SX 50/125 micron 1,804 ft (550 m) multimode fiber 62.5/125 micron 902 ft (275 m) multimode fiber AT-A15/LX 1000Base-LX 9/125 micron single- 6.2 mi (10 km) -
Page 10: Reviewing Safety Precautions
Overview Reviewing Safety Precautions Please review the following safety precautions before you begin to install the expansion module. Laser Warning Class 1 Laser product. ! Laser Warning Do not stare into the Laser beam. ! Warning Lightning Danger DO NOT WORK on equipment or CABLES during periods of LIGHTNING ACTIVITY. -
Page 11: Installing The Expansion Module
AT-A1x Series Expansion Modules Quick Install Guide Installing the Expansion Module To install an expansion module, perform the following steps: Disconnect the switch’s power cord, if attached. Warning Make sure to disconnect the power cord before installing the expansion module. Installing an expansion module without doing so can damage the module. - Page 12 Overview For example, if you install an AT-A17 in slot B while leaving slot A empty, the switch will assign the port numbers 25 and 26 to the ports on the module. If you later install another AT-A17 in slot A, the switch will automatically reallocate port numbers 25 and 26 to the new modules in slot A and assign the port numbers 27 and 28 to the module in slot B.
- Page 13 AT-A1x Series Expansion Modules Quick Install Guide Note All modules except the AT-A18 modules are shipped with a dust cover over the ports. Verify the LEDs on the expansion module’s front panel by referring to Table 2. Table 2 Expansion Module LEDs State Description Indicates a 100 Mbps link.
-
Page 14: Changing The Gbic Module In The At-A15/Sx Or At-A15/Lx Expansion Module
Overview Changing the GBIC Module in the AT-A15/SX or AT-A15/LX Expansion Module The AT-A15 (SX or LX) expansion module can be equipped with the AT-G8SX GBIC module for LED transmission of up to 1,804 ft (550 m) or the AT-G8LX GBIC module for laser transmission of up to 16,400 ft (5 km). - Page 15 Dust in the ports will degrade transmission. Apply power to the switch by re-attaching the power cord. Verify that the Power LED lights green. The AT-A15/SX or AT-A15/LX expansion module is now ready for use.
-
Page 17: Translated Safety Information
Appendix A Translated Safety Information IMPORTANT: This appendix contains multiple-language translations for the safety statements in this guide. WICHTIG: Dieser Anhang enthält Übersetzungen der in diesem Handbuch enthaltenen Sicherheitshinweise in mehreren Sprachen. VIGTIGT: Dette tillæg indeholder oversættelser i flere sprog af sikkerhedsadvarslerne i denne håndbog. - Page 18 Translated Safety Information STANDARDS: This product meets the following standards. U.S. Federal Communications Commission Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
- Page 19 AT-A1x Series Expansion Modules Quick Install Guide OPERATING TEMPERATURE This product is designed for a maximum ambient temperature of 40 degrees C. All Countries: Install product in accordance with local and National Electrical Codes. NORMEN: Dieses Produkt erfullt die Anforderungen der nachfolgenden Normen. Hochfrequenzstörung EN55022 Klasse A WARNUNG: Bei Verwendung zu Hause kann dieses Produkt Funkstörungen...
- Page 20 Translated Safety Information ADVARSEL Laserprodukt av klasse 1. ADVARSEL Stirr ikke på strålen. FARE UNDER UVEJR FARE: UNDLAD at arbejde på udstyr eller KABLER i perioder med LYNAKTIVITET. ADVARSEL: DEN STRØMFØRENDE LEDNING BRUGES TIL AT AFBRYDE STRØMMEN. SKAL STRØMMEN TIL APPARATET AFBRYDES, tages ledningen ud af stikket.
- Page 21 AT-A1x Series Expansion Modules Quick Install Guide NORMES: ce produit est conforme aux normes de suivantes: Emission d’interférences radioélectriques EN55022 Classe A MISE EN GARDE: dans un environnement domestique, ce produit peut provoquer des interférences radioélectriques. Auquel cas, l’utilisateur devra prendre les mesures adéquates.
- Page 22 Translated Safety Information HUOMAUTUS: VIRTAJOHTOA KÄYTETÄÄN VIRRANKATKAISULAITTEENA. VIRTA KATKAISTAAN irrottamalla virtajohto. HUOMAUTUS: Ilmavaihtoreikiä ei pidä tukkia ja niillä täytyy olla vapaa yhteys ympäröivään huoneilmaan, jotta ilmanvaihto tapahtuisi. KÄYTTÖLÄMPÖTILA Tämä tuote on suunniteltu ympäröivän ilman maksimilämpötilalle 40° C. KAIKKI MAAT: Asenna tuote paikallisten ja kansallisten sähköturvallisuusmääräysten mukaisesti.
- Page 23 AT-A1x Series Expansion Modules Quick Install Guide SIKKERHETSKRAV: Dette produktet tilfredsstiller folgende sikkerhetnormer: RFI stråling EN55022 Klasse A ADVARSEL: Hvis dette produktet benyttes til privat bruk, kan produktet forårsake radioforstyrrelse. Hvis dette skjer, må brukeren ta de nødvendige forholdsregler. Immunitet EN50082-1 1997 Elektrisk sikkerhet TUV-EN60950, UL1950, CSA 950...
- Page 24 Translated Safety Information CUIDADO: O CABO DE ALIMENTAÇÃO É UTILIZADO COMO UM DISPOSITIVO DE DESCONEXÃO. PARA DESELETRIFICAR O EQUIPAMENTO, desconecte o cabo de ALIMENTAÇÃO. CUIDADO: As aberturas de ventilação não devem ser bloqueadas e devem ter acesso livre ao ar ambiente para arrefecimento adequado do aparelho. TEMPERATURA DE FUNCIONAMENTO Este produto foi projetado para uma temperatura ambiente máxima de 40 graus centígrados.
- Page 25 Translated Safety Information STANDARDER: Denna produkt uppfyller följande standarder. Radiostörning EN55022 Klass A VARNING: Denna produkt kan ge upphov till radiostörningar i hemmet, vilket kan tvinga användaren till att vidtaga erforderliga åtgärder. Immunitet EN50082-1 1997 Elsäkerhet TUV-EN60950, UL1950, CSA 950 Laser EN60825 VARNING! Laserprodukt av klass 1.
-
Page 27: At-A1X Series Expansion Module Quick Install Guide Feedback
Appendix B AT-A1x Series Expansion Module Quick Install Guide Feedback Please tell us what additional information you would like to see discussed in this guide. If there are topics you would like information on that were not covered in this guide, please photocopy this page, answer the questions and fax or mail this form back to Allied Telesyn. -
Page 29: Technical Support Fax Order
Appendix C Technical Support Fax Order Name ________________________________________________________________________ Company_____________________________________________________________________ Address______________________________________________________________________ City ___________________________State/Province __________________________________ Zip/Postal Code ______________________ Country __________________________________ Phone __________________________________ Fax__________________________________ Incident Summary Allied Telesyn model number ____________________________________________________ Firmware release number of Allied Telesyn product (if applicable) _ _____________________ Other network software products I am using (e.g., network managers) _____________________________________________________________________________ _____________________________________________________________________________ Brief summary of problem ______________________________________________________... -
Page 31: Appendix D Where To Find Us
Appendix D Where To Find Us For Technical Support or Service Location Phone Americas 1 (800) 428-4835 1 (503) 639-3946 United States, Canada, Mexico, Central America, South America Asia (+65) 3815-612 (+65) 3833-830 Singapore, Taiwan, Thailand, Malaysia, Indonesia, Korea, Philippines, China, India, Hong Kong Australia 1 (800) 000-880...
Need help?
Do you have a question about the AT-A15/SX and is the answer not in the manual?
Questions and answers