Onda V-11 SCAN Instruction Manual page 30

EN
3.2 Press the icon
3.3 Press the button Open to load measurement method stored in the internal
memory/USB disk.
3.4 Press the button Measure to accept the new measurement method and back to
measurement interface.
3.5 Put the reference in the measurement channel, press the icon
3.6 Put the sample in the measurement channel, press the icon
sample and record the result.
3.7 Press the icon
Method Select measurement method.
Zero Do 0Abs/100%T.
Read Measure the sample and record the result.
List View the result(s) list.
to select method.
to browse the result(s).
28
to do zero.
to measure a