Quantitation - Onda V-11 SCAN Instruction Manual

EN
2. Press the icon
Abs
%T
E
3. Press the icon
4. Put the reference in the measurement channel, press the icon
5. Put the sample in the measurement channel, press the icon
and record the result.
6. Press the icon

Quantitation

Quantitation mode is used to measure the concentration of the sample(s).
1 Main interface, press the icon
to switch to the measurement mode.
Measure absorbance value of the sample(s).
Measure transmittance value of the sample(s).
Measure energy value of the sample(s).
to set wavelength, key in the measurement wavelength.
to browse the result(s).
to start a Quantitation application.
to measure a sample
24
to do zero.