Settings Of Light Source - Onda V-11 SCAN Instruction Manual

Settings of Light Source

Tungsten lamp reset Reset the Tungsten lamp usage.
Deuterium lamp reset Reset the Deuterium lamp usage.
Select Tab Light source in the System interface. The light source information is displayed on the
screen.
On/Off lamp:
Press the icon
lamp.
Change the lamp Press the value of lamp switching point. Input the new value.
switching point:
Reset the lamp
Press the icon
usage:
lamp/Deuterium lamp usage time.
Visible models
UV/VISIBLE models
to turn on/off the Tungsten lamp/Deuterium
/ to reset the Tungsten
17
EN