Table of Contents
Advertisement
PROGRAMMING
AIRCOM S6 S7 S8 S9 S10
MODE CONTROL BUTTON
Pressing this button will cycle through
the modes: ON Mode, AUTO Mode,
SMART Mode, OFF Mode.
AUTO MODE LIGHT
This orange light indicates
if the system is running in
AUTO Mode.
SMART AND OFF MODE LIGHT
Both the orange and white light will be visible when the controller is in SMART Mode. When both
lights are not visible, the controller is in OFF Mode.
FAN SPEED LIGHT OPTIONS
The fan speed light displays the current speed of the fan. However, the light can also be set to
become invisible automatically when you are not changing the speed settings. Holding the mode
control button for three seconds will alternate between these two setting options.
12
FAN SPEED LIGHT
Indicates fan speed; and
also the speed settings of
AUTO and SMART Mode.
SPEED CONTROL BUTTON
Pressing this button changes the speed
settings while the fans are running in
ON, AUTO, and SMART Mode.
ON MODE LIGHT
This white light indicates if
the system is running in ON
Mode.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the AIRCOM Series and is the answer not in the manual?
Questions and answers