Garmin StreetPilot i2 Manual page 5

➍
Mount the i2/i3
Lever
1. Place the suction cup mount on your windshield with the lever pulled
toward you, as shown above.
2. Press the lever toward the windshield.
3. Plug one end of the vehicle adapter into the USB port on the i2/i3.
Plug the other end into a receptacle in your vehicle.
WARNING: For use in vehicles, it is the sole responsibility of the owner/operator of a vehicle with the i2/i3 installed to place and
secure the device so it will not interfere with the vehicle operating controls and safety devices, obstruct the driver's view of driving
conditions, or cause personal injury in the event of an accident.
Windshield
– 5 –
USB port
E
N