Table of Contents
Advertisement
Attach the front panel
1
Attach the trim plate.
2
Insert the right side of the panel in the
chassis until it is correctly engaged.
3
Press the left side of the panel and point
the left hole at the left pillar.
4
Release the panel to engage the left side.
Install remote control battery
Caution
Risk of explosion! Keep batteries away from
Risk of decreased battery life! Never mix
different brands or types of batteries.
Risk of product damage! When the remote
control is not used for long periods, remove
the batteries.
Perchlorate Material - special handling may
apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate.
1
Remove the protective tab to activate the
remote control battery.
14
EN
To replace the remote control batteries:
1
Open the battery compartment.
2
Insert 1 CR2025 batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
Turn on
1
Press
/OK/MUTE to turn on the unit.
To turn off the unit, press
/OK/MUTE for 3 seconds.
Set clock
1
Press MENU.
2
Press
or
repeatedly until the
currently time is displayed.
3
Turn /OK/MUTE clockwise to set hour.
4
Press /OK/MUTE
5
Turn /OK/MUTE anti-clockwise to set
minute.
6
Press /OK/MUTE
View clock
1
Press and hold OPTIONS repeatedly
until the clock is displayed.
Advertisement
Table of Contents
