Table of Contents
Advertisement
7 Adjust system
settings
Turn demo mode on/off
When demo mode is on, when the unit is
idle for more than 2 minutes, all functions are
displayed.
1
Press MENU.
2
Press
or
repeatedly to until [DEMO]
is displayed.
»
The screen shows current Demo
mode setting.
3
Rotate encoder knob to select a setting:
[DEMO ON] : Turn on the demo
mode.
[DEMO OFF] : Turn off the demo
mode.
Turn beep sound on/off
Each time you press a button, the unit beeps.
You can turn off/on this beep sound.
1
Press MENU.
2
Press
or
repeatedly to until [BEEP]
is displayed.
3
Rotate encoder knob to select a setting:
[BEEP ON]: Turn on the beep
sound.
[BEEP OFF]: Turn off the beep
sound.
20
EN
Reset
You can reset the unit to its default setting.
1
Detach the front panel.
2
Press the reset button by using a ball-
point pen or a similar tool.
»
Preset adjustments such as preset
channels and sound adjustments are
erased.
Advertisement
Table of Contents
