CRL JACKSON 300 SERIES THIN SLAB FLOOR MOUNTED DOOR CLOSER INTRODUCTION The CRL Jackson 300 Series Thin Slab Floor Mounted Door Closer is designed to give long lasting, maintenance free ® performance. Its compact design and low profile makes it ideal for thin slab applications where floor depth is limited. Available in three fixed spring sizes, this closer is designed for use with aluminum, wood or hollow metal doors and frames.
CRL JACKSON 300 SERIES THIN SLAB FLOOR MOUNTED DOOR CLOSER MOUNTING DIMENSIONS Edge of jamb DIMENSION "A" C of Spindle Jackson 300 Series Thin Slab Floor Mounted Door Closer 1'-0" (304.8mm) DIMENSION "B" CLOSER LOCATION INSIDE HEADER MODEL DOOR TYPE HOLD OPEN DIMENSION "A"...
Page 5
CRL JACKSON 300 SERIES THIN SLAB FLOOR MOUNTED DOOR CLOSER CLOSER INSTALLATION Cat. No. 202102N Cement Case 1. Cut-out a 1'-0" (304.8mm) long x 5 5/8" (142.8mm) 2. Place and secure the Cement Case into the wide x 2 1/4" (57.1mm) deep hole.
Page 6
CRL JACKSON 300 SERIES THIN SLAB FLOOR MOUNTED DOOR CLOSER CLOSER INSTALLATION (CONTINUED) 8-32 x 1/2" Machine Screw Cat. No. 202115630 Cover Plate 5. Fasten down the cover plate onto the cement case with (4) 8-32 x 1/2" machine screws.
CRL JACKSON 300 SERIES THIN SLAB FLOOR MOUNTED DOOR CLOSER CLOSER ARM INSTALLATION-CAT NO. 20800628 1/4-20 x 1" Flat Head Machine Screw Arm Plate 8. Secure the arm plate to the bottom door rail with (4) 1/4-20 x 1" flat head machine screws.
Need help?
Do you have a question about the JACKSON 300 Series and is the answer not in the manual?
Questions and answers