Receive Traffic Announcement; Set Rds Clock - Philips CEM2000/00 User Manual

• [AF OFF]: Turn off the AF mode.
Set region for AF tuning
You can define AF tuning region:
[REG Only stations in current region
ON] can be tuned to automatically.
[REG All stations can be tuned to
OFF] automatically.
1
Press MENU.
2
Press or repeatedly until [REG]
(Regional Radio) is displayed.
3
Rotate to select a setting.
Receive traffic announcement
If you do not want to miss traffic
announcement when enjoying music, turn on
the TA (Traffic Announcement) function.
1
Press MENU or OPTIONS.
2
Press or repeatedly until [TA] is
displayed.
3
Rotate to select a setting:
• [TA ON]: When there is traffic
announcement, the unit switches
to the tuner mode (regardless of
the current mode) and begins to
broadcast the traffic conditions.
When the traffic announcement
is over, it returns to the previous
mode.
• [TA OFF]: Traffic announcement
does not cut in.
Note
• If the current received TA signal remains weak
for over 120 seconds, the unit will activate TA
Seek mode automatically. The TA Seek will
seek for other station with good condition of
TA signal.
18 EN
Tip
•
When a traffic announcement cuts in, user
can short press
announcement, and the unit will resume to
previous playback mode.

Set RDS clock

You can use time signal that is broadcast
together with the RDS signal to set the clock of
the unit automatically.
1
Press MENU.
2
Press or repeatedly until [CT] is
displayed.
3
Rotate to select a setting:
• [CT ON]: Turn on the RDS clock.
Time shown on the unit synchronizes
with that on the RDS station.
• [CT OFF]: Turn off the RDS clock.
Tip
•
The accuracy of the transmitted time depends
on the RDS station that transmits the time
signal.
to terminate the traffic